Choosing car detailing equipment is usually a tough job, especially since numerous companies and products are competing for your attention plus your money. But if you use the following five benchmarks to judge each one, in turn, you’ll be able to determine which items are value your consideration. Simply judge each product with a scale of merely one to 5 in each one of these areas, tally inside the score per after which make use of the guide at the end to help with making your choice.
1. Quality and Reputation
Companies that may have spent years developing a reputation in a vehicle detailing field have in mind the value of good work. They also understand customer needs as good as a start-up or fly by night company. Review the company’s background and browse around for reviews for the products themselves before seriously considering anything. Message boards are specifically helpful since the reviews you’ll find usually more frank and honest compared to those found elsewhere.
If you plan on having the ability to offer on the spot service then consider how portable the equipment is. Even if you don’t consider offering this sort of service portability can be important in case you plan to move your shop or simply just rearrange the work area. A machine that can’t be moved could become a liability which will help prevent your business from branching out.
3. Powerful Motor & Heavy Duty Construction
These two components are often the first thing people check when looking at auto detailing equipment. The motor itself should be rugged with the very least strength of 0.75 horsepower. It should even be certified for energy efficiency. Outer casing must be chip-resistant coated steel and should fully stand up well to also resist corrosion. Standard pressure washers are often made from aluminum and even though this might save some bucks, that aluminum is going to be less stable and won’t stand up to questionable and usage.
4. Hoses as well as other accessories
Hoses ought to be dually layered to be able to withstand near-constant use. They must be flexible but strong and possess quality joints. Accessories will be used often and need to become produced from tempered materials that won’t chip or break on tough jobs.
5. Temperature and Flow
High-pressure washers reach temperatures varying between 200 and 330 degrees. The hotter the river the better it will probably be at removing things like grease or tar. Make sure your machine is designed for the workload of warm cleaning. The flow rate will help control water consumption. Many machines flow at 3 to five gallons each minute which could create a lot of waste and also high water bills for the company. A quality machine is capable of doing the position at a flow rate as little as 0.5 gallons for each minute.
Once you’ve rated something over a 1 to scale remove machines that score below 15 points and take particular notice at those which score 20 or above. Consider your neighborhood conditions and needs as well. A state which sees a lot of rain and possesses long construction seasons, for example, Georgia, should make certain that the device can be the challenges presented from the local climate and environment. Equipment to be used in colder states must look at the damage that might be done by road salt and other contaminants which are part of long winters and icy road maintenance. Once you’ve considered the standard of the auto detailing equipment as well as the area in which it is going to be used you’ll be able to generate an informed decision.